Return on Investment for Events

April 25, 2013

Return on Investment for Events

 

The next time you are involved in planning and executing an event consider this 4-step process to optimise your return on investment.

 

Define Objectives

ò

Design to achieve the Objectives

ò

Delivery of the Design

ò

Post Event Evaluation

 

1.       Defining Objectives

 

Although this sounds like an obvious start-point, very often this step in the process is ignored.  There can be an assumption that objectives are obvious and therefore don’t need enumerating, or there may be no clear objectives at all, or perhaps the objectives were clear in the past, but repetition has allowed them to be lost in time.  Without clearly defined and recorded objectives, how can any measure of return on investment be taken, because we haven’t defined a scale of measurement.

 

After an initial stab at identifying the objectives it can be helpful to use a couple of techniques to test and clarify.

a.                   Look back at the return on investment for last event you did and ask:

·        What outcomes did the event achieve?

·        Were these the outcomes we wanted?

·        Are these the outcomes we need this time?

·        What wasn’t achieved?

·        What “missing” outcomes do we need to specify this time?

·        Could the outcomes be delivered more cost effectively?

b.                  Look at the last event from the mind of the visitors and ask:

·        What outcomes did the event give the visitor?

·        What did they learn at the event?

·        What will they do differently because of the event?

·        How has their perception of us changed because of the event?

·        Did the event add value to the visitor?

·        Was the event “value for money” for the visitor?

This should throw up a number of additional objectives for our next event.

 

Having got a list of objectives, group them together as over-arching objectives so that in the end you have no more than 3 or 4 core objectives you want to achieve from this event.

 

2.       Designing to achieve the objectives

 

The design of the event will now have a clear focus and at every stage suggestions need to be measured against the yardstick of the defined objectives.  If a suggestion does not help us to achieve a desired objective, then it is superfluous and should be improved or abandoned.

 

The event design incorporates three distinct time zones:

·        Pre-event

·        Event delivery

·        Post-event

 

In every zone the return on investment should be considered using our yardstick of objectives.  Every zone should have the same ethos and a visitor’s journey through the time zones should appear to them as a seamless whole.

 

There are three further intangible factors which need to be made explicit in the design phase of the project.

·        Brand Integrity

·        The Wow Factor

·        Customer Delight

 

a.       Brand Integrity.  Events are definitionally experiential.  An event puts your brand on show like almost nothing else.  So it is essential that the whole event re-enforces your brand message and your brand image.  Through the three time zones, every contact your visitor has with the event will help them distil the essence of your brand and allow them to build and define or redefine what your brand stands for and what your company, service or product is.  Manage this process, don’t leave any part to chance or assumption.

b.      The Wow Factor.  In the competition for your visitor’s attention, your event starts off as one option in a sea of options.  Without a wow factor you may never even rise above the potential visitor’s horizon.  When you have wowed them to attend the event, you have already raised their expectations.  The bar has been raised and you need to jump it.  On event day, the wow factor needs to exceed expectations.  Following the event (and this is historically the weakest link in the chain), ask yourself how you can wow them yet again.

c.       Customer Delight.  At many events there are factors outside your control.  The weather is not under your influence, yet can make such a difference.  You may be unable to manage the traffic outside the event, you may not have any control over toilets or food or signage.  Work with those who provide the event “services” to try to optimise the visitor experience.  For the “services” or as I will call them “hygiene factors” under your control, make sure you delight the customer.  Don’t “make do” but seek to “delight”.  Sometimes the little things are the most important, and often the little irritations are those which get repeated to colleagues or mentioned derisively in tweets or Facebook posts.

 

 3.      Delivery of Objectives

 

After careful planning the day of the event looms. 

·        The pre-event marketing has already been delivering our objectives and will continue to do so. 

·        The physical construction has been completed and is designed to deliver our objectives

·        The service we will offer visitors is designed to deliver our objectives

·        Our people are all motivated and all have a clear vision of the objectives we want to achieve, and who, how, where and when they will be achieved.

So that’s it? 

 

Well, hopefully that is it, but you need to now do some real-time evaluation.  Someone needs to be partially removed from the hands-on action in order to manage the event and re-specify if required.  Much you cannot change, but lots you can, particularly in the service delivery aspect of the event.  Someone needs to monitor the hygiene factors, move people to better or busier locations, even make physical changes if necessary and possible.

Remember that post-event, the delivery continues.  If we said we’d call someone, we’d better do it.  If we want to send out follow up evaluations, make sales calls etc, these all need to be followed through on, until the event really is over.

 

4.       Evaluation against Objectives

 

Well, was the event a success?  Did we achieve our objectives?  What was our return on investment? What was our visitor’s return on investment? Perhaps start with a simple tick box:                                                        

 

For us

For our visitors

Objective 1

Wholly

Partially

Not at all

 

Wholly

Partially

Not at all

 

Objective 2

Wholly

Partially

Not at all

 

Wholly

Partially

Not at all

 

Objective 3

Wholly

Partially

Not at all

 

Wholly

Partially

Not at all

 

Objective 4

Wholly

Partially

Not at all

 

Wholly

Partially

Not at all

 

What else was achieved?

 

 

 

 

What wasn’t achieved that wasn’t planned?

 

 

 

 

What could have been achieved more cost-effectively?

 

 

 

 

What else was learned?

 

 

 

 

Did the event add value?

 

 

 

Has our brand been enhanced?

Wholly

Partially

Not at all

 

Wholly

Partially

Not at all

 

 

Evaluate, reflect, learn and next time, you can do it better, or not at all if this isn’t the right investment to deliver your objectives.

 

A Better Solution and a Better Bottom Line

January 9, 2013

You may be one of the many exhibition stand builders who usually buy their display lights from the system manufacturers.  This is easy and low risk, but it may also be expensive.

Buying lights from another supplier can seem to add an un-necessary complication to your building process, but it could also save you lots of money which you can add straight to your bottom line.

But, on a quick count-up, we offer over 350 different configuration options for our lights and if that isn’t enoug...


Continue reading...
 

Aardvark Lighting's Stand at FSB Exhibition

November 16, 2012
We exhibited our Battery Powered Lighting at a local Federation of Small Business Show last week.  Here's Joan talking to a potential customer.



Continue reading...
 

LED Bulbs Down in Price

November 14, 2012

Prices DOWN on Battery Lights and LED Bulbs

Time to upgrade your LED bulbs?

I was doing an irregular tidy up amongst our bulb stocks the other day when I came to the LED shelf.  This looks like a history of the LED spotlight bulb.  Inevitably, as I have kept upgrading the stocks as the technology has advanced, I have been left with odd remnants of obsolete stock.  We still have a few of the first MR16, LED bulbs which hit the market (less than a watt and useful only for accent lighting)...


Continue reading...
 

Forgetting Simple Truths

October 4, 2012

Microspot Eazy-Uze 

Sometimes in our headlong rush into the future we can forget some simple truths.  I was reminded of this recently when we supplied a set of Microspot Klamp-On Eazy-Uze lights and upon delivery our customer emailed back to tell us how delighted they were with the product and that it exceeded all his expectations.

The Microspot head, with 400mm arm, adjustable Klamp-on attachment, finished in chrome (& polished anodised aluminium) is still our best selling product, an...


Continue reading...
 

LEDs - How Bright Are They?

August 23, 2012

August 2012 Newsletter

The whole field of LED lighting is a minefield for the exhibition and display designer.  The lower energy use and reduction in heat output make LED’s an ideal step forward for our industry; but the inconsistency in light quality and output per watt and the obfuscation from many manufacturers can make planning an installation into a “best guess” exercise, and none of us wants that.

 

Here at Aardvark Lighting we are supplying more and more LED lighting solution...


Continue reading...
 

July 2012 Newsletter: Finding that special light you need

July 3, 2012

How often have you searched for a specific lighting solution yet cannot find exactly the light you require?  Our production team can assure you that this is a common thread.  Although most of our lights are manufactured to standard specifications, a very significant percentage of our output is non-standard, tailored in some way to meet the customer’s specific requirements. 

Sometimes the specification can just be a simple change such as an extra half me...


Continue reading...
 

Mains Lighting Systems

May 24, 2012

Newsletter:  May 2012

 Mains Lighting Systems

 

Unfortunately we know that exhibition lighting often is added as an afterthought to the layout plans and as such can present numerous problems.  We were recently presented with the drawings for a stand going into a show in the next week and asked to provide a lighting solution.  The design had not considered the possibility of providing any sort of on-stand lighting and all too often it such cases the resulting lighting will end up with a s...


Continue reading...
 

Technical Support, Battery Powered Lighting, The Ryder Cup

May 1, 2012

April Newsletter

 Technical Support

 We offer technical support with your lighting requirements or lighting planning at the other end of the phone, simply ring 01709 300050, or conversely you can email and get a reply back within the day, and often within the hour. 

My own experience tells me this is so important when I consider how long we take in a modern business learning one...


Continue reading...
 

Battery power and the death of the halogen spotlight

March 15, 2012

March 2012

Battery Powered Exhibition Lights

 We are delighted to be able to offer our new range of battery powered exhibition lights for those occasions where mains power is just not available. 

 Sometimes in a field, or the middle of a room we haven’t got access to mains electricity, but good lighting would make all the difference to our displays; that’s when you need our ne...


Continue reading...
 
blog comments powered by Disqus