Telesto Clip on Light

Available Options:

Fixed Mounted or Removable

BUY NOW

Telesto Wall Mounting
Telesto Fixed Wall Mounting
Telesto Klamp-on & Economy Clamp
Telesto Tube Clamp and Bulldog Clip
Telesto Pop-On and Clip-On
Telesto Jack Plug Mounting
Telesto Banner Bung Mounting
Telesto Slot-Over & Slot-In

Telesto - Low Voltage Exhibition Lighting (12V)                       BUY NOW

The Telesto spotlight is a clip on light deal for exhibition and display lighting.  The Telesto is a low voltage light giving clear crisp light, ideally suited for display cabinet lighting.  Manufactured in a chrome or matt black finish the head swivels through 180 degrees allowing you to achieve the best cabinet lighting.  Like all low voltage clip on light this spotlight is the ideal light for graphics,  colours or jewels, using the halogen diachrioc GU5.3 (MR16) bulb.  Like all our low voltage ranges, the Telesto is a simple yet stylish clip on light.

The Telesto requires a transformer but we have 2 simple options:

  • The Eazi-uze 4-light pack provides everything you need when you arrive at the exhibition, 4 clip on light, transformer and bulbs in a re-useable carry case, with a simple jack-plug and sockets, no tools or experts are required.
  • Our in-line version hard-wires a small electronic transformer in-line so that this low voltage lighting can be plugged directly into the mains.




To directly mount onto a wall or ceiling we have four options:



Telesto Cabinet Plate (CP)
is 25mm diameter with 3 screw holes.  This is ideal for mounting in cabinets or discretely on furniture or displays.



Telesto Ceiling Bracket (CB) is 74mm diameter with 4 screw holes.  This is ideal for built exhibition stands or shop fitting.








Telesto Cell Clamp (CC) is a simple right angled bracket with a hole in the base to bolt the light to a fixed surface (eg wall top or aluminium truss).  This provides a simple yet effective way to semi-permanently mount the light.

Telesto Wall Mount (WM) is designed to mount the light onto the top of a wall using 2 screws (not provided).  The arm can be mounted horizontally or tilted back above the horizontal using a simple tri-knob (un-tighten and re-tighten when in position)


To mount and dismantle your lighting we can offer the following ten removable options:



Telesto Economy Clamp (EC)
is a simple clip on light with a clamp mechanism tightened from the rear using the circular knob.  The clamp adjusts from 0mm - 57mm


Telesto Klamp-On (KO) is a robust versatile clamp allowing the arm and head to be positionned from horizontal to vertical as it comes out from the mount.  The klamp-on adjusts from 16mm to 60mm








Telesto Tube Clamp (TC) is our most versatile clamp, fitting tubes as well as boards.  With rubber grips and an adjustment from 5mm to 50mm this clip on light is ideal for clamping a light in those difficult positions.


Telesto Bulldog Clip (BD) is the simplest clip on light when speed of getting on and off is required.  The very strong bulldog clip can clip to boards from 5mm to 50mm








Telesto Pop-on (PO) is designed for pop-up exhibition systems and simple clips under and over the cross members behind the graphics and is held in place by gravity.  So simple and easy to attach and take down it is the ideal complement to any pop-up system


Telesto Clip-on (CO / COMK / COSD) is a simple cantilevered clip for shell-schemes, aluminium profile exhibition systems and board systems with grooves.  Slotted into the groove or profile the light is simply held in place by gravity.  Very simple to use.  Call us to confirm the clip required







Telesto Jack-Plug (JP) is the ideal removeable lighting system.  Mount the jack socket into a wall or ceiling with the cable hidden behind the wall and the light simply pushes and locks in place and a simple red button on the jack socket allows easy and swift removal










Telesto Banner Bung (BB) was designed for simple insertion into exhibition banners which have a hole in the upright pole.  Because of their simplicity they can also be used in some aluminium profile exhibition systems and in any built stand by drilling a hole into the mounting point.  Available in 8, 10, 12, 14mm bottom diameter










Telesto Slot Over (SO)
is a saddle which slots over a board or profile.  Easy on: easy off





Telesto Slot In (SI) is designed with 2 flat prongs to slot into the Nomadic exhibition system



BUY NOW  

Options:

Colours:                   Available in chrome or matt black                                                   

                                             We can match your colour scheme by request and at extra cost.

Arm Options:      100mm, 200mm, 300mm, 400mm (same price) & Swan Neck & 400mm Bendy Arm at extra cost.               

                                             We can manufacture the lights with a specific arm length by request and at extra cost

Bulb Options:  The Telesto uses the MR16 (GU5.3) 12V Diachroic Halogen Bulb.  Our standard bulb is the 50W, 36 degree, 5000 hour bulb

                                             Also stocked:  35W;   50W 60 degree;   Coloured (Magenta, Yellow, Blue, Red & Green);   and Whitestar (Jewellery) bulbs

Transformers:  Eazy-Uze 4-light packs available (complete with 4 Telesto lights on your choice of mount with 3m cable terminating in a jack plug,

                                             4 bulbs, one 4-way jack socket transformer, and a re-useable correx carry case).

                                             60VA in-line transformer

                                             Other transformers available include 105VA, 250, 110V (USA use) and 5-way jack socket transformers


All photographs above in chrome finish with 400mm arm

Other Low Voltage Lighting Designs

                    Mimas              Microspot              Hyperion              Janus                 Phoebe

                                               To BUY NOW click here