Aardvark Display Lighting 07753 796306

Microspot - Low Voltage Exhibition Lighting

BUY NOW

The Microspot spotlight is ideal for exhibition lighting when style and functionality are both paramount.  The Microspot is low voltage lighting at it's best: clear crisp light, stylish and versatile head and manufactured in a polished anodised aluminium to give a chrome-like finish.  The head swivels through 180 degrees allowing you to achieve the best exhibition lighting.  Like all low voltage lighting this spotlight is the ideal light for graphics,  colours or jewels, using the halogen diachrioc GU5.3 (MR16) bulb.  Although usually supplied with a 50W bulb, the Microspot can be supplied in a 100W option packing a massive lighting punch for such a small fitting

The Microspot requires a transformer but we have 2 simple options:

• The Eazi-uze 4-light pack provides everything you need when you arrive at the exhibition, 4 lights, transformer and bulbs in a re-useable carry case, with a simple jack-plug and sockets, no tools or experts are required.
• Our in-line version hard-wires a small electronic transformer in-line so that this low voltage lighting can be plugged directly into the mains.

To directly mount onto a wall or ceiling we have four options:

Microspot Cabinet Plate (CP) is 25mm diameter with 3 screw holes.  This is ideal for mounting in cabinets or discretely on furniture or displays.




Microspot Ceiling Bracket (CB) is 74mm diameter with 4 screw holes.  This is ideal for built exhibition stands or shop fitting.








Microspot Cell Clamp (CC) is a simple right angled bracket with a hole in the base to bolt the light to a fixed surface (eg wall top or aluminium truss).  This provides a simple yet effective way to semi-permanently mount the light.

Microspot Wall Mount (WM) is designed to mount the light onto the top of a wall using 2 screws (not provided).  The arm can be mounted horizontally or tilted back above the horizontal using a simple tri-knob (un-tighten and re-tighten when in position)



To mount and dismantle your lighting we can offer the following ten removable options:

Microspot Economy Clamp (EC) is a simple clamp mechanism tightened from the rear using the circular knob.  The clamp adjusts from 0mm - 57mm



Microspot Klamp-On (KO) is a robust versatile clamp allowing the arm and head to be positioned from horizontal to vertical as it comes out from the mount.  The klamp-on adjusts from 16mm to 60mm







Microspot Tube Clamp (TC) is our most versatile clamp, fitting tubes as well as boards.  With rubber grips and an adjustment from 5mm to 50mm this is ideal for clamping a light in those difficult positions


Microspot Bulldog Clip (BD) is the simplest clip when speed of getting on and off is required.  The very strong bulldog clip can clip to boards from 5mm to 50mm









Microspot Pop-on (PO) is designed for pop-up exhibition systems and simple clips under and over the cross members behind the graphics and is held in place by gravity.  So simple and easy to attach and take down it is the ideal complement to any pop-up system

Microspot Clip-on (CO / COMK / COSD) is a simple cantilevered clip for shell-schemes, aluminium profile exhibition systems and board systems with grooves.  Slotted into the groove or profile the light is simply held in place by gravity.  Very simple to use.  Call us to confirm the clip
required







Microspot Jack-Plug (JP) is the ideal removeable lighting system.  Mount the jack socket into a wall or ceiling with the cable hidden behind the wall and the light simply pushes and locks in place and a simple red button on the jack socket allows easy and swift removal













Microspot Banner Bung (BB) was designed for simple insertion into exhibition banners which have a hole in the upright pole.  Because of their simplicity they can also be used in some aluminium profile exhibition systems and in any built stand by drilling a hole into the mounting point.  Available in 8, 10, 12, 14mm bottom diameter









Microspot Slot Over (SO) is a saddle which slots over a board or profile.  Easy on: easy off





Microspot Slot In (SI) is designed with 2 flat prongs to slot into the Nomadic exhibition system