Janus - Low Voltage Clip on Lights for Exhibition Lighting (12V) BUY NOW
The Janus display spotlights are Italian styled cast aluminium clip on lights, ideal for a multitude of applications in the exhibition and display industry. These display spotlights are an ideal solution when a simple yet stylish look is needed. The Janus clip on lights can be mounted on a variety of systems (see below) and use the ever popular 50W low voltage halogen diachroic MR16 bulb. This halogen light gives the best colour rendition of any display spotlights and is ideal for graphics, product display, colour and jewellery. Finished in matt-aluminium or matt-black the head swivels through 180 degrees allowing excellent versatility. The Janus clip on lights are a powerful tool in the designers armoury.
The Janus requires a transformer but we have 2 simple options:
- The Eazi-uze 4-light pack provides everything you need when you arrive at the exhibition, 4 clip on lights, transformer and bulbs in a re-usable carry case, with a simple jack-plug and sockets, no tools or experts are required.
- Our in-line version hard-wires a small electronic transformer in-line so that this low voltage lighting can be plugged directly into the mains.
Janus Tube Clamp (TC) is our most versatile clamp, fitting tubes as well as boards. With rubber grips and an adjustment from 5mm to 50mm this is ideal for clamping a light in those difficult positions
Janus Bulldog Clip (BD) are the simplest clip on lights when speed of getting on and off is required. The very strong bulldog clip can clip to boards from 5mm to 50mmwith 3 screw holes.
To directly mount onto a wall or ceiling we have four options:
Janus Cabinet Plate (CP) is 25mm diameter
This is ideal for mounting in cabinets or discretely on furniture or displays.
Janus Ceiling Bracket (CB) is 74mm diameter with 4 screw holes. This is ideal for built exhibition stands or shop fitting.
Janus Cell Clamp (CC) is a simple right angled bracket with a hole in the base to bolt the light to a fixed surface (eg wall top or aluminium truss). This provides a simple yet effective way to semi-permanently mount the light.
Janus Wall Mount (WM) is designed to mount the light onto the top of a wall using 2 screws (not provided). The arm can be mounted horizontally or tilted back above the horizontal using a simple tri-knob (un-tighten and re-tighten when in position)
To mount and dismantle your lighting we can offer the following ten removable options:
Janus Economy Clamp (EC) is a simple clamp mechanism tightened from the rear using the circular knob. The clamp adjusts from 0mm - 57mm
Janus Klamp-On (KO) is a robust versatile clamp allowing the arm and head to be positionned from horizontal to vertical as it comes out from the mount. The klamp-on adjusts from 16mm to 60mm
Janus Pop-on (PO) is designed for pop-up exhibition systems and simple clips under and over the cross members behind the graphics and is held in place by gravity. So simple and easy to attach and take down it is the ideal complement to any pop-up system
Janus Clip-on (CO / COMK / COSD) are simple cantilevered clip on lights for shell-schemes, aluminium profile exhibition systems and board systems with grooves. Slotted into the groove or profile the light is simply held in place by gravity. Very simple to use. Call us to confirm the clip required
Janus Jack-Plug (JP) is the ideal removeable lighting system. Mount the jack socket into a wall or ceiling with the cable hidden behind the wall and the light simply pushes and locks in place and a simple red button on the jack socket allows easy and swift removal
Janus Banner Bung (BB) was designed for simple insertion into exhibition banners which have a hole in the upright pole. Because of their simplicity they can also be used in some aluminium profile exhibition systems and in any built stand by drilling a hole into the mounting point. Available in 8, 10, 12, 14mm bottom diameter
Janus Slot Over (SO) is a saddle which slots over a board or profile. Easy on: easy off
Janus Slot In (SI) is designed with 2 flat prongs to slot into the Nomadic exhibition system
Options:
Colours: Available in matt-aluminium or matt-black.
We can match your colour scheme by request and at extra cost.
Arm Options: 100mm, 200mm, 300mm, 400mm (same price) & Swan Neck & 400mm Bendy Arm at extra cost.
We can manufacture the lights with a specific arm length by request and at extra cost
Bulb Options: The Janus uses the MR16 (GU5.3) 12V Diachroic Halogen Bulb. Our standard bulb is the 50W, 36 degree, 5000 hour bulb
Also stocked: 35W; 50W 60 degree; Coloured (Magenta, Yellow, Blue, Red & Green); and Whitestar (Jewellery) bulbs
Transformers: Eazy-Uze 4-light packs available (complete with 4 Janus lights on your choice of mount with 3m cable terminating in a jack plug,
4 bulbs, one 4-way jack socket transformer, and a re-useable correx carry case).
Other transformers available include 105VA, 250, 110V (USA use) and
5-way jack socket transformers
