Available Options:
Fixed Mounted or Removeable
Mimas - LED Spotlight
The Mimas LED spotlight is the ideal clip on lighting for displays when style matters. The Mimas LED delivers 12v LED display lighting in the most stylish manner with an Italian styled head and manufactured in a bright chrome finish. The head swivels through 180 degrees allowing you to achieve the best LED display lighting. .
The Mimas LED clip on lighting requires a LED driver, a tiny transformer like electronic driver.
To directly mount onto a wall or ceiling we have four options:
Mimas LED Cabinet Plate (CP) is 25mm diameter with 3 screw holes. This is ideal for mounting in cabinets or discretely on furniture or displays.
Mimas LED Ceiling Bracket (CB) is 74mm diameter with 4 screw holes. This is ideal for built exhibition stands or shop fitting when you need excellent LED display lighting.
Mimas LED Cell Clamp (CC) is a simple right angled bracket with a hole in the base to bolt the light to a fixed surface (eg wall top or aluminium truss). This provides a simple yet effective way to semi-permanently mount the light.
Mimas LED Wall Mount (WM) is designed to mount the light onto the top of a wall using 2 screws (not provided). The arm can be mounted horizontally or tilted back above the horizontal using a simple tri-knob (un-tighten and re-tighten when in position)
To mount and dismantle your lighting we can offer the following nine removable options:
Mimas LED Economy Clamp (EC) is a simple clamp mechanism tightened from the rear using the circular knob. The clamp adjusts from 0mm - 57mm
Mimas LED Klamp-On (KO) is a robust versatile clamp allowing the arm and head to be positionned from horizontal to vertical as it comes out from the mount. The klamp-on adjusts from 16mm to 60mm
Mimas LED Tube Clamp (TC) is our most versatile clamp, fitting tubes as well as boards. With rubber grips and an adjustment from 5mm to 50mm this is ideal for clamping a light in those difficult positions
Mimas LED Bulldog Clip (BD) is the simplest clip on lighting when speed of getting on and off is required. The very strong bulldog clip can clip to boards from 5mm to 50mm
Mimas LED Pop-on (PO) is designed for pop-up exhibition systems and simple clips under and over the cross members behind the graphics and is held in place by gravity. So simple and easy to attach and take down it is the ideal complement to any pop-up system
Mimas LED Clip-on (CO / COMK / COSD) is a simple cantilevered clip for shell-schemes, aluminium profile exhibition systems and board systems with grooves. Slotted into the groove or profile the light is simply held in place by gravity. Very simple to use. Call us to confirm the clip required
Mimas LED Banner Bung (BB) was designed for simple insertion into exhibition banners which have a hole in the upright pole. Because of their simplicity they can also be used in some aluminium profile exhibition systems and in any built stand by drilling a hole into the mounting point. Available in 8, 10, 12, 14mm bottom diameter
Mimas LED Slot Over (SO) is a saddle which slots over a board or profile. Easy on: easy off
Mimas LED Slot In (SI) is designed with 2 flat prongs to slot into the Nomadic exhibition system
Options:
Colours: Available in chrome.
We can match your colour scheme by request and at extra cost.
Arm Options: 100mm, 200mm, 300mm, 400mm (same price) & Swan Neck & 400mm Bendy Arm at extra cost.
We can manufacture the lights with a specific arm length by request and at extra cost
Bulb Options: The Mimas LED uses the MR16 (GU5.3) 12V LED Bulb. Our standard bulb is the 4W (equivalent to c. 20 watt halogen bulb)
Other bulbs are available please phone to discuss options.
LED Drivers:
The LED driver is smaller than an electronic transformer and wires up
like a transformer. We can provide this pre-wired in-line or supply the
All photographs above in chrome finish with 400mm arm
Other LED Spot Light Designs
